Replacing The Dust Bag, S-Bag; Replacing The Motor Filter And Exhaust Filter; Austausch Des Staubbeutels S-Bag; Austauschen Des Motorfilters Und Abluftfilters - Electrolux Ultra Silencer Series Operating Instructions Manual

Table of Contents

Advertisement

1
4
6
9
12
10
A
B
2
5a
7
10
13
English
R EPL ACI NG T HE D US T BA G, S -BA G™
1
The dust bag, s-bag™ must be replaced latest when the
indicator window is completely red. Read with the nozzle
lifted up.
2
Fold down the carrying handle. Press the catches on the
hose, remove the hose and open the cover.
3
3
Lift out the insert holding the s-bag™.
4
Pull the cardboard to remove the s-bag™ from the insert.
This automatically seals the s-bag™ and prevents dust
leaking out.
5 a
Insert a new s-bag™ by pushing the cardboard right into
the end of the groove in the insert.
5 b
Attach the insert by placing it on the back pegs in the bag
compartment. Then fold down the insert and close the
cover.
Note. Replace the s-bag™ even if it is not full (it could be obstructed).
5b
Also replace after vacuuming carpet-cleaning powder. Be sure to use
only an original Electrolux dust bags, s-bag™ Classic or s-bag™
Clinic.
Replacement of the motor filter (Ref. No. EF54)
should be done with every 5th replacement of the dust bag, s-bag™
6
Fold down the carrying handle. Press the catches, remove
the hose and open the front cover.
7
Lift out the insert holding the s-bag™.
8
Pull the motor filter holder upwards until it comes away
from the groove.
9
Carefully pull the old, dirty filter out of the filter holder and
replace it with a new motor filter.
10
Reattach the filter holder containing the new motor filter.
8
11
Replace the insert holding the s-bag™ and then close the
cover.
Replacement of the exhaust filter
should be done with every 5th replacement of the dust bag, s-bag™
There are two types of exhaust filter:
• Hepa H12 (Ref. No. EFH12)
• Microfilter (Ref. No. E17)
The filters must always be replaced with new ones and cannot
be washed.*
12
Fold up the carrying handle until it clicks into place.
11
13
Place your thumbs on the back edge of the lid and then
open the lid by pulling the handle backwards and upwards
with your index/middle finger.
14
Lift out the filter. Insert a new filter and replace the lid as
shown.
14
*A washable filter – HEPA H13 – can be bought as an option.

Advertisement

Table of Contents
loading

Table of Contents