Table of Contents
Advertisement
OPERATION
Tips : Also remember to read this operating instruction for proper safety information and instruction before using
the oven. Prior to setting the controls, place one cup of water in the oven, on a heat-proof glass measuring
cup, for testing purposes.
Note : When the operation is finished the oven beeps three times, " : 0" or clock appears in the display, the
rotating plate stops turning and the oven light turns off. The oven will continue to beep every 1 minute until
the STOP/CLEAR pad is touched or the door is opened.
The cooling fan runs for 1minute after the cooking has stopped if the cooking time is 30seconds through
2minutes 59seconds. Also the cooling fan runs for 2minutes after the cooking has stopped if the cooking
time is more than 3minutes.( the display will show "COOL" and " :0 or clock" )
Opening the oven door interrupts any operation except cooling fan. To cancel the operation, touch
STOP/CLEAR pad. To continue the operation, touch START/SPEEDY COOK pad.
The oven displays the set cooking time in 10 seconds steps( up to 5 minutes cooking time ), in 30 seconds
steps( up to 10 minutes cooking time ), in 1 minutes steps( up to 60 minutes cooking time ).
MICROWAVE COOKING
This microwave cooking method allows you to cook food for a desired time. In addition to the maximum power
level(100%), you can select different microwave power from 9 other levels, 10% to 90% for the foods that require
slower cooking. If you have used the appliance for grilling, convection or combination cooking, let the oven cool down
before using again. Never switch the microwave oven on when it is empty.
1. Touch MW pad.
(Select the desired power level.)
2. Touch the time set pads for the cooking
time.
3. Touch START pad.
When you touch START pad, the M/W indicator starts blinking to show the oven is cooking.
The display counts down the time to show how much cooking time is left. When the cooking time ends, you will hear 3 beeps.
Note : The oven will automatically work on 100% microwave power if a cooking time is entered without the power
level previously being selected. You can check the power level while cooking is in progress by touching the
MW pad. The display will show the current power level for 3 seconds.
Power level table
Power level
percentage
P-HI
100%
P-90
90%
P-80
80%
P-70
70%
P-60
60%
The M/W indicator lights.
The display will show what you touched.
The display will show what you touched.
Output
Power level
900W
P-50
810W
P-40
720W
P-30
630W
P-20
540W
P-10
P-00
11
NOTE: If step 1 is omitted, the oven will
cook at full power.
NOTE: Your oven can be programmed for
59 minutes 99 seconds.(59:99)
percentage
Output
50%
450W
40%
360W
30%
270W
20%
180W
10%
90W
0%
0W
Advertisement
Table of Contents
