Power Mode Switch; Master Power Switch - Episode ES-SUB-ELE8-110 Owner's Manual

ES-SUB-ELE-8-10-12 Owner's Manual
9.2. ES-SUB-ELE10-200 & ES-SUB-ELE12-300
1
2
3
4
5
6
1. STATUS LED
Red- Subwoofer is in standby mode, or power mode switch is set to OFF. AC power is present.
Blue- Subwoofer power mode switch is set to ON, or is set to AUTO and signal is being received.

2. Power Mode Switch

3 way toggle switch for setting power mode to OFF, AUTO, or ON.
3. Volume Knob
Adjust subwoofer volume.
4. Phase Knob
Set the phase of the subwoofer in relation to the listening area. Continuously variable from 0 to 180°.
5. Crossover Knob
Adjust the crossover frequency (limits the highest frequency the subwoofer will play).
*Note: Set the crossover knob to "LFE" if the LFE input is used.
6. LOW LEVEL Inputs & Outputs (RCA)
For left/right or LFE connections from audio source, and outputs for connecting other equipment. To connect LFE, use
the L (left) channel connections.
7. HIGH LEVEL Inputs & Outputs (Speaker Wire Binding Post)
Connect left/right connections from speaker cable runs, and loop to other speakers.
8. Voltage Selector Switch
Select the input voltage. Default: 100-120V.

9. Master Power Switch

Rocker switch to turn power off to the subwoofer. Power LED will be off if switch is off but power is present.
10. Power Cord Inlet
Connect the included cord for providing power.
11. Fuse Holder (ES-SUB-ELE-10 and 12 Only)
Master Power fuse. See Specifications for the correct size and rating for the model in use. Includes spare fuse inside
holder.
Page 10
STATUS
OFF ON
AUTO
VOLUME
MIN MAX
PHASE
For continued Protection against risk
of fire, replace only with same type
fuse and rating.
0˚ 180˚
100
CROSSOVER
HIGH LEVEL
IN
50 LFE
LOW LEVEL
IN LFE
OUT
ES-SUB-ELE12-300
Designed and Engineered in USA
Manufactured in China
CAUTION: ATTENTION:
Utiliser un fusible de rechange de
meme type et calibre.
OUT
100-120V
L
POWER
R
FUSE T6.3AL/250V
100-120V~60Hz 4A /
220-240V~50Hz 2A
7
8
9
220-240V
10
11