Table of Contents
Advertisement
29. Turn on your oscilloscope and adjust to the following settings:
a) Channel 1 to 2V per division.
b) Channel 2 to 2V per division.
c) Time Base to 1ms
d) Triggering to Normal
Example of the scope we used at Russound
30. Connect a UNO-S2 Keypad to UNO Keypad Port 1 of the CAV6.6.
31. Connect a set of speakers to Zone Output number 1 of the CAV6.6.
32. Move the Source Function Selector Switch of the iBridge Dock to the 1 position.
33. Plug the 12V Power Supply into the iBridge Dock and RNET AV Decoder.
34. Turn on the CAV6.6.
35. Ensure your iPod is not in the iBridge Dock.
36. Push the Source button on the UNO-S2 until Source 1 is Displayed.
37. "Source 1" will only be displayed for a few seconds.
38. Wait a few seconds and "WAITING FOR IPOD" will scroll across the UNO-S2.
iBridge & RNET AV Decoder
Revised August 7, 2006
13 of 33
Advertisement
Table of Contents
