Table of Contents
Advertisement
20. Connect the Advanced Programming Cable to the "OS UPDATE PORT" of the iBridge
dock.
21. Move the Source Function selector switch to the PRGM position.
22. Using a 12V Power Supply plug +12V power to the iBridge dock.
23. On the "FDT Simple Interface" dialog box click the "Program Flash" box.
The iBridge Dock is now being programmed, look on the next page for examples of dialog
boxes during programming.
iBridge & RNET AV Decoder
Revised August 7, 2006
9 of 33
Advertisement
Table of Contents
