• The product has been exposed to rain • The product doesn’t seem to operate normally • The product is damaged Don’t attempt to service the product yourself. Doing so will void the warranty. If you have any questions, call Russound at 1.800.638.8055 or 603.659.5170.
Product Overview The BGD1 iBridge Dock allows you to use an iPod as a remote source for a Russound RNET multiroom system. Used with a Russound RNET A/V Decoder, it provides either RNET or infrared (IR) con- trol of the iPod, depending on the type of system.
Connections Note: The BGD1 iBridge Dock requires the use of an RAVD1 RNET A/V Decoder at the audio system, regardless of which system is used. 1. Locate devices. Place the iBridge Dock where the iPod will be located. Place the RNET A/V Decoder with the audio system controller.
IR control of the iPod. Firmware Update From time to time Russound may offer updated firmware for the BGD1 iBridge Dock. You can download updated firmware from the Document Center at www.russound.com. 1. Disconnect power. Unplug the power adapter from the Dock.
2.00.01 is required for use with iBridge. The touchscreen controls and displays information from the iPod the same way it does for a music stream on Russound’s SMS3 Smart Media Server. When set up with the “iPod (iBridge)” source tem- plate (see touchscreen installation instructions), the...
Damage to or destruction of components due to application of excessive power voids the warranty on those parts. In these cases, repairs will be made on the basis or the retail value of the parts and labor. To return for repairs, the unit must be shipped to Russound at the owner's expense, along with a note explaining the nature of service required.