Russound BGD1 iBridge Dock Instruction Manual page 13

Items needed:
2 – 6' Cat5e patch cables
1 – 6' Cat5e cable connecting the UNO-S2 to the CAV6.6
1 – IBM PC (Windows XP loaded) with RS232 Comm port
1 – Russound Advanced Programming cable (p/n 2500-521065)
supplied by Russound
1 – CAV6.6 and UNO-S2 Keypad supplied by Russound
1 – iBridge Dock
1 – AV Decoder
1 – iPod 30GB or 60GB only (must have video output to TV)
1 – TV or Video Monitor with RCA composite video input jack
(Viewsonic N2750W used in this manual)
2 – 12V Power Supply
1 – SRC2 Remote Control with iPod functions supplied by Russound
1 – cable with mono 1/8" phono jacks on each end
1 – Stereo RCA cable
1 – RCA composite video cable
Approximate time to complete test is less than 7 minutes.
Note: Building the CAT5e patch cable and wiring an UNO-S2 keypad is described
at the end of this procedure on pages 25 and 26.
1. The procedure assumes you have already loaded the "Flash Development Toolkit Version
3.3".
2. If FDT3.3 is not installed on your PC go to the procedure for obtaining and installing "Flash
Development Toolkit Version 3.3".
3. Double click the icon
iBridge & RNET AV Decoder
Test Procedure
iBridge & RNET AV Decoder
Revised August 7, 2006
2 of 33
Revised August 7, 2006