Russound BGD1 iBridge Dock Instruction Manual page 23

28. Connect the CAV6.6 to the AV Decoder.
a) Use RCA Cables with feed thru jacks on one end and connect to the AV Out of the
RENT AV Decoder and the other end to the Source 1 Input of the CAV6.6.
b) Use a CAT5e patch cable to connect the RNET LINK of the RNET AV Decoder to the
RNET LINK OUT of the CAV6.6
c) Use a second set of RCA cables to connect to the feed thru jacks on the RNET AV
Decoder and the other end to the input of each channel of the Dual Trace Oscilloscope.
UNO-S2
Zone Output 1 of CAV6,6
iBridge & RNET AV Decoder
Revised August 7, 2006
12 of 33
Dual Trace
Oscilloscope