Kärcher ESB 28 Original Instructions Manual page 9

Never immerse the electrical suction
–
brush in water or any other liquids while
cleaning.
After wet cleaning the carpets, use the
–
machine only after they are completely
dry; otherwise the machine can get
damaged.
Never use the machine to suck up
–
match sticks, burning ash, cigarette
butts or fluids. Avoid sucking in hard,
pointed objects as they can damage the
machine.
Please keep children away from electri-
–
cal appliances.
Only trained technicians may carry out
–
repairs to electrical appliances. Improp-
er repairs can pose serious hazards to
the users.
In case of any malfunctions, please
–
contact your dealer or the concerned
Customer Service.
No liability for damages can be assumed
–
if the appliance has been put to improper
use or has been used wrongly.
Please follow the safety instructions of
–
your basic appliance.
The rotating brush in the electric suction
brush loosens the dirt in the carpet much
better than traditional vacuum cleaners.
This brings about a more intensive cleaning
effect.
 Insert the telescopic suction pipe in the
connection hub of the suction head.
Note: The safety pin must lock into the
bore.
 Insert the plug of the suction head into the
socket at the telescopic suction pipe.
 Insert the manifold of the electrical suc-
tion hose into the telescopic suction
pipe and turn until the safety pin locks
into the hole.
Downloaded From Vacuum-Manual.com Manuals
Function
Start up
Assembly
 Insert the fast-on connection of the tele-
scopic suction pipe into the socket at the
manifold of the electrical suction hose.
Illustration
 Only for vaccum cleaner T201: Replace
the yellow safety ring at the suction con-
nection of the vacuum cleaner with the
enclosed black safety ring (item 5).
Push the cover (item 4) over the suction
connection.
Illustration
 Insert the electrical suction hose into
the suction connection of the vacuum
cleaner.
 Only for vaccum cleaner T201: Push
the cover on the safety ring and secure
the electronic suction hose. Check and
ensure proper fitting of the electronic
suction hose.
Illustration
 Insert the plug of the electrical suction
hose into the socket at the front side of
the vacuum cleaner.
Note:The appliance is now ready for oper-
ation. The appliance is switched on through
the startup; please read the operating in-
structions and the catalog "Safety instruc-
tions for dry/ wet vacuum cleaners".
Danger
Do not drive the rotating brushes over the
mains cable! Carry the appliance over
steps and high thresholds!
 Pick up the larger parts such as cloth
pieces, paper, etc. from the floor prior to
cleaning. This will prevent the brush
roller from being blocked.
 Switch on/off the electrical suction
brush using the switch at the handle.
Note: You have to work with the brush roll-
er switched off if you want to vacuum clean
high-flounce carpets, carpet edges, animal
skins, etc.
Note: If the suction head is hard to push,
decrease the vacuum cleaner power. The
appliance function is not significantly im-
paired by this.
– 2
EN
Operation
9