Declaration Of Conformity - Bosch PSB 700-2 RE Operating Instructions Manual

Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Keyless chuck
2 "Drilling/Impact Drilling" selector switch
3 Indicator for right-hand rotation
(PSB 1000-2 RCE/PSB 1000-2 RCA)
4 Indicator for left-hand rotation
(PSB 1000-2 RCE/PSB 1000-2 RCA)
5 Stand-by indicator (PSB 1000-2 RCE/
PSB 1000-2 RCA)
6 Overload protection indicator (PSB 1000-2 RCE/
PSB 1000-2 RCA)
7 "Speed Control" thumbwheel (PSB 1000-2 RCE/
PSB 1000-2 RCA)
8 Lock-on button for On/Off switch
9 On/Off switch
10 Rotational direction switch
11 Gear selector
12 Auxiliary handle with holder for extraction device*
13 Set collar for depth stop*
14 Telescopic guide*
15 Release buttons for dust collector*
16 Dust collector*
17 Dust protection ring*
18 Adapter for connection to the impact drill*
19 Wing bolt for adjustment of auxiliary handle
20 Locking latch für dust collector*
21 Filter element (micro filter system)*
22 Button for depth stop adjustment
23 Auxiliary handle*
24 Depth stop*
25 Front sleeve
26 Rear sleeve
27 Screwdriver bit*
28 Universal bit holder*
29 Allen Key**
30 Thumbwheel for speed preselection
(PSB 700-2 RE/PSB 780-2 RE/PSB 800-2 RA)
31 Indicator for right-hand rotation
(PSB 700-2 RE/PSB 780-2 RE/PSB 800-2 RA)
32 Indicator for left-hand rotation
(PSB 700-2 RE/PSB 780-2 RE/PSB 800-2 RA)
*The accessories illustrated or described are not
included as standard delivery.
**Commercially available (not included in the delivery
scope)
18 | English
Noise/Vibration Information
Measured values determined according to EN 60745.
Typically the A-weighted noise levels of the product
are: Sound pressure level 97 dB(A); Sound power
level 108 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) determined
according to EN 60745:
Drilling into metal:
2
a =3.7 m/s , Uncertainty K =1.5 m/s
h
Impact drilling into concrete: Vibration emission value
2
a =21 m/s , Uncertainty K =2.3 m/s
h
Screwdriving: Vibration emission value a
Uncertainty K =1.5 m/s
The vibration emission level given in
WARNING
this information sheet has been meas-
ured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with
another.
The vibration emission level will vary because of the
ways in which a power tool can be used and may
increase above the level given in this information sheet.
This could lead to a significant underestimate of expo-
sure when the tool is used regularly in such a way.
Note: To be accurate, an estimation of the level of
exposure to vibration experienced during a given period
of work should also take into account the times when
the tool is switched off and when it is running but not
actually doing the job. This may significantly reduce the
exposure level over the total working period.

Declaration of Conformity

We declare under our sole responsibility that the prod-
uct described under "Technical Data" is in conformity
with the following standards or standardization docu-
ments: EN 60745 according to the provisions of the
directives 89/336/EEC, 98/37/EC (until Dec. 28,
2009), 2006/42/EG (from Dec. 29, 2009 on).
Dr. Egbert Schneider
Senior Vice President
Engineering
20.11.2006, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Vibration emission
2
,
2
,
<2.5 m/s
h
2
.
Dr. Eckerhard Strötgen
Head of Product
Certification
2 609 002 333 • 4.6.07
value
2
,