Declaration Of Conformity - Bosch GSR 1000 SMART Professional Original Instructions Manual

Cordless Screwdriver
Article number
Rated voltage*
No-load speed
Max. torque for hard/soft screwdriving application according to ISO 5393
Max. screw dia.
Weight according to EPTA-Procedure 01/2003
Cordless Screwdriver
Battery
Article number
Capacity
Rated voltage*
Number of battery cells
No-load speed
Battery Charger
Max. torque for hard/soft screwdriving application according to ISO 5393
Article number
Max. screw dia.
Charging time
Weight according to EPTA-Procedure 01/2003
Output voltage
Battery
Charging current
Capacity
Protection class
Number of battery cells
*Measured without workload, peak voltage of 12 V. Under load the rated voltage is 10.8 V.
Battery Charger
Noise/Vibration Information
Article number
Sound emission values determined according to
Charging time
EN 60745-2-1.
Output voltage
Typically the A-weighted sound pressure level of the
Charging current
product is less than 64 dB(A).
Uncertainty K =3 dB. Protection class
The noise level when working can exceed 75 dB(A).
*Measured without workload, peak voltage of 12 V. Under load the rated voltage is 10.8 V.
Wear hearing protection!
Vibration total values ah (triax vector sum) and uncertainty
K determined according to EN 60745:
Drilling into metal: a <0,9 m/s
h
Screwdriving: a <1,0 m/s
h
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool
with another. It may be used for a preliminary assessment
of exposure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for
different applications, with different accessories or poorly
maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job. This
may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and
the accessories, keep hands warm, organise work patterns.

Declaration of Conformity

We declare under our sole responsibility that the product
described under "Technical data" is in conformity with all
relevant provisions of the directives 2009/125/EC
(Regulation 1194/2012), 2011/65/EU, 2014/35/EU,
2014/30/EU, 2006/42/EC.
including their amendments and complies with the following
standards:
EN 60745-1, EN 60745-2-1 (battery powered product),
EN 60745-2-2 (for drilling and screwdriving) EN 60335-1,
EN 60335-2-29 (battery charger).
1 600 A00 9CD | 02.15
Manual GSR 1000 SMART.indd 21
2 2
, K =1,5 m/s ,
2 2
, K =1,5 m/s .
V=
-1
min
Nm
mm
Kg
Ah
V=
-1
min
Nm
mm
h
Kg
V
A
Ah
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
h
70764 Leinfelden-Echterdingen
V
GERMANY
A
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
28.01.2015
Assembly
u Before any work on the machine (e. g., maintenance,
tool change, etc.) as well as during transport and
storage, set the rotational direction switch to the
centre position. Unintentional actuation of the On/Off
switch can lead to injuries.
Battery Charging (see figure A)
u Do not use other battery chargers. The supplied
battery charger is designed for the Lithium-Ion battery
in your machine.
u Observe the mains voltage! The voltage of the power
supply must correspond with the data given on the
nameplate of the battery charger. Battery chargers
marked with 230 V can also be operated with 220 V.
Note: The battery supplied is partially charged. To ensure full
capacity of the battery, completely charge the battery in the
battery charger before using your power tool for the first time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging procedure
does not damage the battery.
The lithium-ion battery is protected against deep
discharging by the "Electronic Cell Protection (ECP)". When
the battery is empty, the machine is switched off by means
of a protective circuit: The inserted tool no longer rotates.
u Do not continue to press the On/Off switch after the
machine has been automatically switched off. The
battery can be damaged.
GSR 1000 SMART
3 601 JF4 0..
10,8/12
0 - 700
21
English |
6/15
6
0,9
GSR 1000 SMART
Li-Ion
3 601 JF4 0..
1,5
10,8/12
3
0 - 700
6/15
1 600 A00 8..
6
1
0,9
15
Li-Ion
1,5
1,5
/II
3
1 600 A00 8..
1
15
1,5
/II
Bosch Power Tools
19/02/15 10:36