Year Guarantee; Specifications; Safety Instructions - LEITZ HR 9 Operating Instructions Manual

English
Entrance slot
READY indicator
POWER switch – ON/OFF
Temperature control

Safety instructions

and conditions for use
This machine has been developed for laminating paper or
similar materials. Use it for this purpose only and as
described in these instructions.
·
Set the machine up on a stable surface (e.g. table) close
to a mains socket.
·
Do not touch the hot surfaces of the unit or place
anything on top of it.
·
To protect against electric shock do not operate the
machine near water or in high humidity.
·
Unplug machine from mains socket when not in use and
before cleaning.
·
Allow the machine to cool before cleaning.
·
The machine is maintenance-free when used correctly
for its intended application. To clean the housing: Wipe
with a soft cloth and a general-purpose household
cleaner.
·
In case of defects: Do not attempt to repair the machine
yourself. Please contact your dealer for any required
repairs. Read guarantee declaration for further informa-
tion.
·
Keep the operating instructions with the unit at all times.

Specifications

Working mode
Heating system
Working temperature
Throughput speed
Pre-heat time
Mains voltage
Power consumption,
HR 9 / 12
Recommended pouch thickness
(per pouch)
Max. working width,
HR 9 / 12
Net weight, HR 9 / 12
Dimensions (H x W x D),
HR 9
HR 12
Technical approvals
Subject to technical changes without prior notice.
4-roller, carrier/carrierless
Heated rollers
Variable (0–160 °C)
Constant, 325 mm/sec
2–3 min
230/240 V AC
700 W / 700 W
75–250 mic (3–10 mil)
240 mm / 320 mm
3.0 kg / 4.1 kg
108 x 212 x 440 mm
108 x 212 x 526 mm
Tick

2 year guarantee

To be returned with the unit if defective.
Leitz units are sold with a 2 year guarantee.The conditions of
the guarantee period of 2 years are as follows:
1. Each unit is guaranteed against all defects in material
and/or workmanship for a period of 2 years from the
date of purchase.
2. No unit will be accepted without written notification from
the customer giving details of the problem that has
occurred, and proof of the date of purchase.
3. All units for repair are to be returned to Esselte with
adequate packaging. No liability will be accepted by
Esselte for goods damaged in transit from the customer,
due to inadequate attention to packaging.
4. The supplier will be responsible for all parts and labour
charges as necessary to the unit. The 2 year guarantee
is subject to the following conditions:
a) That the unit has been used strictly in accordance
with the operating instructions supplied with the unit.
b) That if the benefit of this guarantee is sought, the unit
must be returned, carriage paid to Esselte. Esselte
does not accept responsibility for loss or damage in
transit.
c) That the guarantee is invalid if the defects are found
to be caused by accident, misuse, alteration or
neglect.
d) That no liability of Esselte is to be implied here for
damage, loss or expense of any kind resulting from,
consequence upon, or in any way due to any fault
whatsoever in the instrument or its accessories.
e) That this guarantee does not affect you statutory
rights as a consumer.
Date of Purchase:
Model No. Serial No.:
Company Name:
Contact person:
Address:
Telephone/Fax No:
ESSELTE U.K. Ltd
Waterside House, Cowley Business Park
High Street, Cowley
Middx UB8 2HR
ENGLAND
Tel: 020 8282 1000
Fax: 020 8844 1869
4