INTELLIGENT BATTERY CHARGER
A series of chargers that are protected against
damage with watertight ABS housings
12-bit AD microprocessor with 4-stage charging characteristic for
use in small automobiles and motorcycles
For common lead and gel batteries
TÜV-/GS-tested
CE-tested
DFC 530
intelligent battery charger with 5.3 A RMS
Charges with 6 or 12 V, 3.5 A DC (5.3 A RMS)
–
For gel cell or common lead acid batteries
–
Self-identifying four-stage characteristic curve, full capacity,
–
absorption, floating operation
Watertight housing, Ingress Protection Rating IP 65
–
Dimensions: (LxWxH) 16x7x4cm
–
Features:
Full protection against sparks
–
Short circuit protection
–
Voltage compensation
–
Temperature compensation (5-6 temperature settings)
–
Overheating protection
–
Polarity reversal protection
–
Indicators:
Reversed polarity – reversed connection
–
Battery < 3V – battery fault
–
Connection to power supply – when the charger is connected
–
too a source of alternating current.
Charging – when the battery is absorbing the charge
–
Battery charged – when the battery is completely charged or
–
in floating operation mode
9
Need help?
Do you have a question about the DFC 530 and is the answer not in the manual?