Product Overview (Rear Panel) - Chauvet Stage Designer 50 User Manual

28 Blackout
29 Audio Level Fader
30 Speed Fader
31 Fade Fader
32 Master A_B

Product Overview (rear panel)

1
2
Item Button or Fader
1 3-pin DMX output
connector
2 5-pin DMX output
connector
3 Polarity switch
4 MIDI Thru
5 MIDI Out
6
MIDI In
7 Audio Input
8 Remote Input
9
DC Input
Stage Designer™ 50
Used to kill all output, with exception of Full On.
Adjusts the audio sensitivity when in Audio trigger mode of scenes
Used to adjust the sped of scenes/chases running
Adjusts the fade-in, fade-out, and cross-fade times
Adjusts overall intensity
4 5
6
3
Function
DMX control signal
DMX control signal
Used to select DMX polarity
MIDI port for connecting to a sequencer or MIDI device
MIDI port for connecting to a sequencer or MIDI device
MIDI port for connecting to a sequencer or MIDI device
This jack accepts a line level audio input signal ranging from 100mV to
1Vpp
Blackout and Full On may be controlled by a remote control using a
standard ¼´jack
DC 12-20V, 500mAMin.
11
7
8
9
Rev. 9