IBM RackSwitch G7028 Product Manual page 5

o Metering
o 4 MB shared packet buffer
o Weighted random early detection with explicit congestion notification (WRED/ECN)
o CPU priority policies (CoPP)
High availability

o HotLinks
o Layer 2 Failover
Multicast

o IGMP v1, v2, and v3 snooping with 256 IGMP groups
Monitoring

o Port mirroring
o ACL logging
o CPU logging
Management features
Here are the RackSwitch G7028 management features for the clients:
ISCLI (Cisco-like)

Browser-based interface Telnet/ssh

Standard protocols
Here are the RackSwitch G7028 standard protocols:
SNMP v1, v2c, and v3

IPv6

RMON

Secondary NTP Support

DHCP Client

LLDP

8K MAC Table

12 K Jumbo Frames

802.3X Flow Control

You can upgrade the firmware through serial or TFTP.
Summary: IBM System Networking RackSwitch G 7000 Redundant Power Supply
The front and rear views of the IBM System Networking RackSwitch G7000 Redundant Power Supply are
shown in Figures 5 and 6.
Figure 5. Front view of the RackSwitch G7000 Redundant Power Supply
Figure 6. Rear view of the RackSwitch G7000 Redundant Power Supply
IBM System Networking RackSwitch G7028 5