IBM RackSwitch G7028 Product Manual page 11

Figure 10 shows a 2-post Rack Mount Kit.
Figure 10. The 2-post Rack Mount Kit
The Switch module (Figure 1) part number/MTM includes the following items:
One RackSwitch G7028 (Rear-to-Front).

Generic Rack Mount Kit (2-post).

Power Cord Retention Clip.

RJ45 to DB9 serial cable (1.8 m).

Comes with an IBM limited 3-year hardware warranty with Next Business Day (NBD), 9x5, Customer

Replaceable Unit (CRU) warranty service and includes a 3-year software license, providing
entitlement to upgrades over that period.
Country-specific AC power cords, which are plugged into the power source (wall or PDU), must be

ordered separately. For more information about the available power cords for the RackSwitch G7028,
see Tables 3 and 4.
The Redundant Power Supply module (see Figures 5 and 6) part number/Feature Code includes the
following items:
One IBM RackSwitch G7000 Redundant Power Supply.

Two DC cables come standard for connectivity of two RackSwitch G7028 switches. Clients can order

additional DC cables (to connect up to four RackSwitch G7028 switches).
Power Cord Retention Clip.

Generic Rack Mount Kit (2-post).

Comes with an IBM limited 1-year hardware warranty or the remaining warranty of the RackSwitch

G7028 switch (whichever is longer).
Country-specific AC power cords, which are plugged into the power source (wall or PDU), must be

ordered separately. For more information about the available power cords for the RackSwitch G7028,
see Tables 3 and 4.
Note: Make sure that you include power cords that are relevant to your country of purchase. Small
form-factor pluggable plus (SFP+) transceivers are not included.
IBM System Networking RackSwitch G7028 11