Package Contents DCS-700L Wi-Fi Baby Monitor Wall Mount Kit Power Adapter Blue and Pink Accent Rings Quick Install Guide If any of the above items are missing, please contact your reseller. Minimum Requirements • Smartphone or tablet: Refer to the mydlink Baby app page on the App Store and Google Play •...
Hardware Overview Front View Night Vision Light (IR) Camera Lens Microphone Light Sensor Front Accent Ring Camera Base Back View Speaker Cloud/Direct Power LED Mode LED Direct Connect Reset Button Button MicroUSB Power Port...
2. Remotely... Connect to your DCS-700L using the Internet. Note: You can also connect directly to your DCS-700L wirelessly, so there is no need for an Internet connection or a router. See the Advanced Features section of the User Manual for details. Go to mydlink.com/support to download the DCS-700L...
Installation WARNING - STRANGULATION HAZARD Children have STRANGLED in cords. Keep adapter cord out of reach of children (minimum of 3 ft or 1m away). NEVER place the camera or adapter cord inside the crib or child sleeping area. Do not use extension cords.
Tap Setup on the start screen to launch the Setup Wizard. It will guide you through the configuration process.
DCS-8 0 FCC ID: KA2CS80 0LA1 IC: 4216A-CS 800LA1 3(B) CAN ICES-3 (B)/NMB- Model: DCS-800L Make sure the camera is positioned so that the D-Link logo is at the bottom of the base. Adjust the angle of the camera as desired.
• The Wi-Fi network name is [myBabyCam-XXXX], where XXXX is the last four digits of your camrea’s MAC address. (This number can be found on the label on the bottom of your DCS-700L.) • The Wi-Fi network name and password is printed on a label on the bottom of your camera and on the back of this install guide.
6. Should the app be running constantly on my device? The app can run in the background, allowing you to hear your baby continuously, even when the phone is locked. The smartphone or tablet can still be used normally while the app is running. If you do not want to hear audio from the camera when the app is open, you can turn off the Background audio on the Configuration menu.
9. How do I activate push notifications? A. Go to the Home page and log in. B. After logging in, you will notice that the refresh icon on the top right has changed to an alarm clock icon. C. Tap on the alarm clock icon, and you will see the Push Notification setting. Tap on the switch icon to activate push notifications.