• This product is not a replacement for responsible adult supervision. D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.
Package Contents DCS-825L Wi-Fi Baby Camera Wall Mount Kit Power Adapter Desktop Base Pink Accent Rings Quick Install Guide If any of the above items are missing, please contact your reseller. Minimum Requirements • Smartphone or tablet with iPhone / iPad: iOS 5.1.1 or higher; Android 4.01 or higher...
Hardware Overview Front View Temperature Sensor Temperature Indicator Lullaby/Volume/ Power Buttons Night Vision Lights (IR) Focus Ring Camera Lens Light Sensor Microphone Camera Base Front Accent Ring Base Accent Ring Back View Bottom View Speaker Reset Button Micro-USB Power Port Power LED Cloud LED Mounting Point...
Installation Warning: To prevent your baby from being strangled, please keep all cables such as the power cable out of your baby’s reach. Cables must be at least 3 feet from the crib according to the Consumer Product Safety Commission (CPSC). Plug in your camera and wait until the Power LED turns green.
Connect to the Camera’s Wi-Fi signal. The Wi-Fi network name and password are located on the label on the back of this booklet. iPhone/iPad: Settings > Wi-Fi Settings Android: Settings > Wireless & Networks > Wi-Fi Settings Launch the mydlink Baby app. The app will guide you through the configuration process.
Mount the Camera Please refer to the steps below to assist you with mounting the camera. We suggest that you configure the camera before mounting. Warning: Placing your camera around water may cause accidental shocks. • Place the wall mount where you want to position the camera and use a pencil to mark the holes.
• Remove the base from the camera by simply pulling it off. • Loosen the collar on the camera stem and then screw the camera stem into the bottom of the camera. Turn the securing wheel to ensure the connection to the camera is snug.
FAQs 1. The Image is out of focus. You can turn the white focus ring on the front of the camera to adjust the focus. 2. How do I change the accent rings? Rotate the access ring counterclockwise, then lift it off. Put the new ring on and rotate it clockwise until it clicks into place.