Table of Contents
Advertisement
Wireless L AN connection
Reading the QR code generated by the WUQR using the [Config by QR](P
for establishing a Wireless LAN connection.
1
. Tap the [WUQR] on the Android device.
2
1
. Select [
:WLAN settings ssid password].
Select the item with [Back] and [Next].
3
. Enter the [ssid] and [pass] of the specified Wireless LAN in the input area.
4
. Tap [Make].
e QR code is generated.
5
. Read the QR code with the [Config by QR] on the device.
When the device establishes a Wireless LAN connection properly, the ssid is displayed to
the side of [W:] at the top left of the screen.
• Once the QR code is generated by tapping [Make], the data entered in [ssid] and
NOTE
[pass] are saved to the device. To delete the data, tap [Default] - [Make].
• The device may be unable to establish connection with the access point that has
been set to the stealth mode. In such case, cancel the stealth mode temporarily, or
complete the Wireless LAN setting through [SETTING].To set VPN or fixed IP, it is
also required to perform the Wireless LAN setting via [Setting].
36
Menu display area
Select the menu with [Back] and [Next].
Inp u t area
Tapping [Make] displays the Input area content
as a QR code.
QR co de display area
29
) allows
Advertisement
Table of Contents
