Charging The Batteries - InfoLinker WUZ-01B User Manual

Glasses-type wearable device
Hide thumbs Also See for WUZ-01B:
Table of Contents

Advertisement

Charging the batteries

Fully charge the battery prior to first use, and recharge the battery when it is drained.
Charging the battery for the first time will take approximately
Be careful with the
battery direction.
Insert the plug into an outlet.
• The LED may blink in red when a battery is inserted into the charger.If this happens,
NOTE
remove the battery, wait for several seconds and insert again.
• If a fully charged battery is inserted into the charger, the LED may not turn on.
Batter y Maintenance
If the battery terminal becomes dirty, clean with a soft, dry cloth. Getting finger oil, sweat, or
dust on the terminal may prevent proper charging.
NOTE
Do not use organic solvents (benzene, thinner, and like), acids, or alkalis.
14
Charge
indicator LED
2
hours.
Battery charge indicator
Charging state
No battery inserted Not lit
Charging
Charging complete
Abnormal temperature Blinking red light
Abnormal charge
Charge indicator
LED state
Green light
Blinking green light
Red light

Advertisement

Table of Contents
loading

Table of Contents