InfoLinker WUZ-01B User Manual page 27

4
[ :ACCELEROMETER]
Checks if acceleration is measured properly.
If the sensor value changes, the check result at the top of the screen changes to
does not change, restart the device and check again.
5
[ :GYROSCOPE]
Checks if angle and angular velocity are measured properly.
If the sensor value changes, the check result at the top of the screen changes to
does not change, restart the device and check again.
6
[ :MAGNETICFIELD]
Checks if magnetic field is measured properly.
If the sensor value changes, the check result at the top of the screen changes to
does not change, restart the device and check again.
7
[ :CAMERA]
Checks if the camera operates properly.
e camera (barcode reader) will start up automatically.
Read a barcode or QR code.
If the data can be read properly, the check result at the top of the screen changes to
8
[ :MICROPHONE]
Checks if the microphone operates properly.
Input any voice into the device's microphone during the countdown.
If the recording is completed properly, the check result at the top of the screen changes to
• When the headset is connected, the check is conducted preferably on the headset
NOTE
microphone.
Countdown
. If the value
If the value
.
If the value
.
.
.
27