InfoLinker WUZ-01B User Manual page 26

1
[ :WLAN]
Checks if a Wireless LAN connection can be established properly.
When Wireless LAN is ON:
The check is conducted automatically. If no problem is found, the screen displays [Wireless
LAN [OK]], and the check result at the top of the screen changes to
If the check is not conducted automatically, hold the button
When Wireless LAN is OFF:
The Wireless LAN function is automatically turned ON. Then hold the button
If no problem is found, the screen displays [Wireless LAN [OK]], and the check result at the
top of the screen changes to
2
[ :BLUETOOTH]
Checks if a
Bluetooth
When
Bluetooth
The check is conducted automatically. If no problem is found, the screen displays [Bluetooth
[OK]], and the check result at the top of the screen changes to
If the check is not conducted automatically, hold the button
When
Bluetooth
The
Bluetooth
displays [Bluetooth [OK]], and the check result at the top of the screen changes to
If the check is not conducted automatically, hold the button
3
[ :TOUCH SENSOR]
Checks if the touch sensor operates properly.
Touch the touch sensor with one finger, and then two fingers. If the sensor value changes with each
touch with one-finger and two-fingers, the check result at the top of the screen changes to
If the value does not change, restart the device and check again.
26
.
® connection can be established properly.
is ON:
is OFF:
function is automatically turned ON. If no problem is found, the screen
.
❹ .
. .
❹
.
❹ .
Sensor value
Number of detected fingers
❹ .
.
.