Table of Contents
Advertisement
Problem
Operation of rekordbox becomes unstable.
The fader start function does not work.
Only one track deck is display on the screen.
The platter is not displayed on the track
deck.
20
En
Check
Are you using softwares other than rekordbox at the same
time?
When other USB devices are connected to the computer.
Are you using a USB hub?
There is a problem with the USB port to which this unit is
connected.
Is this unit connected to a notebook computer running on
its battery?
The USB buffer size is too small.
Is a cue set?
Is rekordbox set to the [EXPORT] mode?
Has rekordbox dj been activated?
Remedy
Quit other applications to decrease the load on the computer.
If operation continues to be unstable, try disabling the wireless network or other wireless
connections, antivirus software, the screen saver, the low power mode, etc.
Disconnect other USB devices from the computer.
When another USB audio device is connected to the computer at the same time, it may not
operate or be recognized normally.
USB hubs cannot be used. Connect the computer and this unit directly using the included
USB cable.
If your computer has multiple USB ports, try connecting this unit to a different USB port.
Supply power to the notebook computer from an AC power supply.
(Depending on the notebook computer's settings, the low power mode may be set when the
computer is running on its battery, automatically reducing the performance of the computer
itself.)
Enlarge the USB buffer size. (page 18)
Set the cue.
Click the area indicated by [EXPORT] at the upper left of the screen, and then select
[PERFORMANCE].
Enter the rekordbox dj license key included with this unit on the [Preferences] > [License]
screen of rekordbox. For details on the activation, see the rekordbox Manual.
Advertisement
Table of Contents
