Hardware Overview; Connectors And Buttons - Axis q6044 User Manual

AXIS Q6044 PTZ Dome Network Camera

Hardware Overview

Hardware Overview
NOTICE NO NO TICE TICE
Make sure the dome is attached in operation mode, otherwise focus may be affected.
1
Part number (P/N) & Serial number (S/N)
2
Network connector (PoE+)
3
Multi-connector
4
Dome
5
SD card slot
6 Status LED indicator
7
Control button
8
Power button

Connectors and Buttons

For technical specifications, see page 65.
Network Connector
RJ45 Ethernet connector with Power over Ethernet Plus (PoE+).
NOTICE NO NO TICE TICE
Use the supplied midspan.
NO NOTICE NO TICE TICE
Due to local regulations or the environmental and electrical conditions in which the product is to be used, a shielded network
cable (STP) may be appropriate or required. All cables connecting the product to the network and that are routed outdoors
or in demanding electrical environments shall be intended for their specific use. Make sure that the network devices
are installed in accordance with the manufacturer's instructions. For information about regulatory requirements, see
Electromagnetic Compatibility (EMC) on page 2 .
1
5
6
7
7
8