JVC KD-SX985 Service Manual page 5

QQ
3 7 63 1515 0
Removing the heat sink (See Fig.6)
1. Remove the four screws C attaching the heat sink
on the left side of the body, and remove the heat
sink.
Removing the rear panel (See Fig.7 )
Prior to performing the following procedure, remove
the front chassis, the heat sink and bottom cover.
1. Remove the eight screws D attaching the rear panel
and one screw E attaching the pine jack on the back
of the body.
TE
L 13942296513
Removing the main amplifier board assembly
Prior to performing the following procedure, remove
the front chassis, the heat sink, bottom cover and the
rear panel.
1. Remove the two screws F
amplifier board assembly on the top cover.
2. Disconnect connector CN101 on the main amplifier
board assembly from the cassette mechanism
www
assembly.
.
http://www.xiaoyu163.com
(See Fig.8)
attaching the main
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
C
Heat sink
Rear panel
D
Q Q
3 6 7 1 3 1 5
D
CN101
F
co
Main board assembly
.
9 4 2 8
C
C
Fig. 6
E
0 5 8 2 9 9 4 2 8
D
D
Fig. 7
m
Fig. 8
KD-SX985
9 9
D
9 9
F
1-5