Pioneer DV-C503 Service Manual page 56

DV-C503
QQ
3 7 63 1515 0
Description
FL
of Error
SGC converge
39 SGC could not converge during detects the peak
timeout
41 Spindle timeout The unit did not enter Stop mode within 10 seconds of issuance of a Stop command.
The spindle could not converge into within ± 12% of
the target FG rotation speed within 10 seconds after
spindle kick. The first time after startup (the first time
Spindle FG after disc distinction), it doesn't become the number of
48
transition timeout
the target rotation within five seconds. The first time
after startup, detects the abnormal rotation number of
high-speed continuously 3 loops. DVD: 5 to 9 mS ,
CD: 40 to 60 mS
After the second times after startup, it doesn't become the number of the target rotation
Spindle PLL
49 within five seconds. Detects the abnormal high-speed or low-speed rotations. DVD: 5 to
transition timeout
9 mS , CD: 40 to 60 mS
4A Spindle lock timeout Spindle could not lock more than 1.5 seconds before start the AFB.
Auto sequence ABUSY did not return within 1 second after the
51
timeout of peak DDTCT (peak detection) command was sent.
Auto sequence
ABUSY did not return within 30 mS after the FJMPD
52
timeout of focus
(Focus jump 1 to 0) command was sent.
jump down
Auto sequence ABUSY did not return within 30 mS after the FJMPU
53
timeout of focus (Focus jump 0 to 1) command was sent.
Auto sequence ABUSY did not return within 50 mS after the GSUMON
54
TE
L 13942296513
timeout of play AGC (play-AGC-measuring) command was sent.
Auto sequence
ABUSY did not return within 2 seconds after the
55
timeout of disc-type-
DJSRT (disc-sensing) command was sent.
sensing
ABUSY did not return within 1 second after the
Auto sequence
56
TBLOFS (Internal ATB after the completion of external
timeout of ATB2
ATB) command was sent.
Auto sequence
ABUSY did not return within 500 mS after the TSON
57
timeout of tracking
(tracking servo ON) command was sent.
servo ON
Auto sequence ABUSY did not return within 200 mS after the TBL
58
timeout of ATB1 (external ATB) command was sent.
Auto sequence
ABUSY did not return within 2 seconds after the FGN
59
timeout of focus gain
(focus gain adjustment) command was sent.
adjustment
Auto sequence
ABUSY did not return within 2 seconds after TGN
5A
timeout of tracking
(tracking gain adjustment) command was sent.
gain adjustment
Auto sequence
ABUSY did not return within 1 second after the
5B
timeout of offset
CMDAVE (offset adjustment) command was sent.
adjustment
Auto sequence
ABUSY did not return within 200 mS after the ADJMIR
5C timeout of
(modulation factor measurement) command was sent.
modulation factor
measurement
Auto sequence
ABUSY did not return within 2 seconds after the AFB
5D
timeout of auto focus
(auto focus bias) command was sent.
bias
A command could not be sent because ABUSY was
www
Auto sequence
5F
low. ABUSY did not return within 200 mS after TLV
already busy
command was sent.
Pause mode could not be restored within three retries
62 Pause retry error
after it had been released.
.
56
http://www.xiaoyu163.com
Causes if with a DVD
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Causes if with a CD
Q Q
3 6 7 1 3 1 5
co
.
9 4 2 8
Operation of the
Open
Stop
Stops. (FG timeout)
Stops.
("73" is displayed during
starting process.)
Stops.
("73" is displayed during
starting process.)
Stop
Stop
Stop
Stop
0 5 8 2 9 9 4 2 8
Stop
Stop
Stop
Stop
Stop
Stop
Stop
Stop
Stop
m
Stop
Continues operation
9 9
9 9