Avery Dennison Monarch 9855 Quick Reference page 8

3 .
Feed the backing paper over the peel bar.
Peel
Bar
Low er
Opening
4 .
Feed the backing paper through the lower opening of
the exit cover. Close the exit cover. Pull down on the
backing paper to remove any slack.
Te ar
Edge
Backing
Paper
When removing the backing paper, pull up
across the saw-toothed tear edge. Make sure
the backing paper tears at the edge.
5 .
Close the printer's cover.
6 .
Press Feed/Cut several times to feed at least three
labels/tags to properly position the supply and the
ribbon.
8