Philips HC3410 User Manual page 25

5
6
Never immerse the appliance in water or rinse it
under the tap.
7
1
2
8
Replacement
Only replace a worn or damaged cutting unit with
an original Philips cutting unit, available from
2
authorised Philips service centres.
1
1
2
1
2
Clean the cutting unit with the brush or rinse
it under the tap.
Clean the inside of the appliance with the
brush.
Shake off excess water. To reattach the cutting
unit, insert the lug of the cutting unit into the
guiding slot.
Insert the lug of the cutting unit into the
guiding slot (1) and push the cutting unit back
onto the appliance (2).
Press the release button (1). The cutting unit
comes off the appliance (2).
Insert the lug of the new cutting unit into the
guiding slot (1) and push the cutting unit back
onto the appliance (2).
24
English