Gigastor Schedule Tab - Network Instruments GigaStor 114ff User Manual

GigaStor Schedule tab

70 Configuring the GigaStor through the Control Panel
Chapter 4 GigaStor Control Panel
This tab lets you schedule GigaStor packet captures to occur at preset
times and days of the week. Although the dialog looks identical to the
standard Packet Capture schedule tab, the two types of schedules can
not be in effect at the same time. If you attempt to schedule GigaStor
packet captures when standard packet captures are already scheduled
(or the reverse), an error message is displayed.
Follow the instructions in "Configuring the GigaStor through the
Control Panel" on page 63 to open the Schedule tab (Figure 43).
Figure 43 Schedule tab
Choose No Scheduling to turn off any automatically
scheduled packet captures for the selected probe or probe
instance.
Choosing Always causes the selected probe or probe instance
to capture packets whenever the probe is running.
rev. 1