Advertisement
No.
PROCESS
Mount the
Dummy plate
32-T
instead of
Calendar plate.
Refer to the Fig.16
Fix the Dummy
plate by tightening
31
the Calendar plate
screw.
Cal.5D88A TECHNICAL GUIDE
ILLUSTRATION AND SPECIAL INSTRUCTIONS ETC.
Mount the Dummy plate.
<32-T>
Before assembling the case back side of the movement, mount the Dummy plate instead of
the Calendar plate. (The Calendar plate is thicker, and if the Calendar plate is mounted,
the pins on the movement holder cannot come through the holes of the other side of the
main plate and cannot guide the alignment.)
Firmly press down the points of engagement ( "a" and "b" portions) so that the dummy
plate is securely mounted.
a
Fig.16
<31>
Fix the Dummy plate to the main plate by tightening the Calendar Plate screw.
25/51
b
NO. 4
Advertisement
