Advertisement
TECHNICAL GUIDE
Winding stem
id
if f Clutch wheel
ig g Winding pinion
When installing the WINDING STEM, support the WINDING PINION and the CLUTCH WHEEL by
using the movement holder as illustrated below.
ul Yoke
Securely hook the arm of the YOKE inside the pin of the main plate, taking care so as not to
deform the arm of the YOKE.
uk Setting lever
uj Setting lever jumper
uh Setting lever jumper screw
Securely engage the pin on the backside of the SETTING LEVER (indicated by
below) with the guiding slit of the SWITCHING LEVER. Sliding the SWITCHING LEVER towards the
"a" portion in the illustration below will make this easier.
Clutch wheel
if
Winding pinion
ig
Winding stem
id
18/51
Cal. 5D88A
in the illustration
Advertisement
