Wireless - Atlantis Land A02-RA141-W54 User Manual

5.6 Wireless

This section introduces the wireless LAN and some basic configurations. Wireless
LANs can be as simple as two computers with wireless LAN cards communicating
in a peer-to-peer network or as complex as a number of computers with wireless
LAN cards communicating through access points which bridge network traffic to
the wired LAN.
Click on "Interface Setup" then "Wireless".
Label
Access Point
SSSID
Wireless LAN
Description
Default setting is set to Activated. If you do not have any
wireless, both 802.11g and 802.11b, device in your network,
select Deactived.
The SSID is the unique name of a wireless access point (AP)
to be distinguished
from another. For security propose, change the default A02-
RA141-W54 to a unique ID name to the AP which is already
built-in to the router's wireless interface. It is case sensitive
and must not excess 32 characters. Make sure your wireless
clients have exactly the SSID as the
A02-RA141-W54
WebShare 141W
Pag. 35