HP Z620 Disassembly Instructions Manual page 2

2.0 Tools Required
Tool Description
Assorted Torx drivers, screwdrivers and a diagonal cutter
3.0 Product Disassembly Process
(See instructions below in sections 3.2 and 3.3.)
3.2 Workstation Disassembly Procedures
1. Power off the workstation.
2. Remove/disengage any security devices that prohibit opening the workstation.
3. Disconnect the power cord from the electrical outlet and then from the workstation.
4. Disconnect all peripheral device cables from the workstation.
5. Remove the side access panel. Pull up on the handle and rotate the cover off the chassis.
6. Disconnect all internal cables from system board, power supply, and other components.
7.
Remove the system battery. Use a flat-edged screwdriver to leverage battery out of the battery
holder. Rotate the battery beyond the battery holder edges and lift it out.
EL-MF877-00
Template Revision A 678155-001 (HP Z620 Workstation Disassembly Instructions)
Tool Size (if
applicable)
Page 2