Filter Setting; Temperature; Current Time - Siemens TK 68 E 570 Operating Instructions Manual

Filter setting

Ä Ä Ä Ä Ä Ä Ä Ä Ä
FILTER
Ä Ä Ä Ä Ä Ä Ä Ä Ä
YES/NEW
Ä Ä Ä Ä Ä Ä Ä Ä Ä
FILTER
NO/OLD

Temperature

Ä Ä Ä Ä Ä Ä Ä Ä Ä
TEMP.
Ä Ä Ä Ä Ä Ä Ä Ä Ä
normal
Ä Ä Ä Ä Ä Ä Ä Ä Ä
TEMP.
high
TEMP.
Ä Ä Ä Ä Ä Ä Ä Ä Ä
MAXIMUM
Ä Ä Ä Ä Ä Ä Ä Ä Ä

Current time

TIME
--:--
TIME
Ä Ä Ä Ä Ä Ä Ä Ä Ä
14:39
Ä Ä Ä Ä Ä Ä Ä Ä Ä
A filter 17 is available as an optional accessory for the water
tank 19 (order no 46 1732). Follow the instructions enclosed
with the filter 17.
i
First insert filter 17, then change the appliance setting.
q Hold down button
q Select FILTER with< or >.
%
q Press button
q Change the setting with < or >.
%
q Press button
q Press the 6 button. Back to standby.
Note: Change or remove used filter 17 as soon as system
message FILTER CHANGE is displayed! If a new filter
is not inserted, check the setting for FILTER NO / OLD
and the water hardness.
The coffee temperature can be set with this function.
q Hold down button
q Select TEMP. with < or >.
%
q Press button
q Change the setting with < or >.
%
q Press button
q Press the 6 button. Back to standby.
The current time is programmed with this function.
This is required when using the timer function.
q Hold down button
q Select TIME with< or >.
%
q Press button
q Change the setting with < or >.
%
q Press button
q Change the setting with < or >.
%
q Press button
q Press the 6 button. Back to standby.
The set time will be deleted
- if the mains plug is pulled out,
- if the appliance is switched off with the mains switch 9,
- if there is a power failure.
The current time must be input again.
%
on display 4 for at least 3 seconds.
until the display flashes.
to save the setting.
%
on display 4 for at least 3 seconds.
until the display flashes.
to save the setting.
%
on display 4 for at least 3 seconds.
, hours display flashes.
, minutes display flashes.
to save the setting.
37