Identify The Connectors And Attach The Cables - Netopia 4522 T1 Getting Started Manual

Identify the Connectors and Attach the Cables

Identify the connectors and switches on the back panel and attach the necessary Netopia Router cables.
The figure below displays the back of the Netopia 4522 T1 Router.
1 Ethernet
1 Computer
3
Power
2 T1
1 Netopia Router
Making the Physical Connections 2-3
Connect your computer, T1
line, and power source as
shown.
1. For a direct computer to
router Ethernet connection,
use a crossover cable (not
included), or connect through
a hub or switch with a
standard Ethernet cable.
2. Use the supplied line
cable to connect the router
to your T1 wall outlet.
3. Connect the supplied
power brick to a power outlet
and the mini-DIN8 connector
end to the router.