Adjustment Of Rear Brake - Kinroad XT110-9 User Manual

Adjustment of
Brake
★ The vehicle should be supported
by the main stand for check.
(1) The rear brake pedal has a
free operating movement of 20-
30mm as shown in the figure on the
right side.
(2) To make adjustment, turn the
rear brake adjust ing nut clockwise
to reduce snd counter clock wise to
increase the free
movement of the brake pedal.
Adjustment of Chain
1.When regulation is needed.
Ioosen the rear axle nut
2.Turn the chail adjust ing nuts
Rear
operating
on the left and right sides to adjust
the tension of the chain and to align
the marking of the chain adjuster
with the engraved lines in the
similar position, on both sides.
axke nut by a torque of 35-50Nm.
tension of the chain.
changed in position and the chain
adjusted,
movement of the rear brake pedal
will be affected, which, therefore,
should be checked thereafter and
also regulated if necessary
18
3.Tighten the lock nut and rear
4. Repetitively check
5.When the rear wheel is
the free operating
the