Kinroad XT110-9 User Manual page 12

V.Checking,Adjustm-
ent and Maintenance
Machine Oil Checking
★ The vehicle should be checked
for machine oil before drive by sup-
porting it with the
Main stand on a flat ground.The oil
livel should be between the upper and
lower
Lines of the oil gauge. Which is not
screwed into the filling orif ice.
★ High quality 4-stroke machine
oil. Class SE or SD in API classifi-
cation.of SAE15W-40 in viscosity will
help maintain a long service life or the
engine.In case those are not available,a
substitute suitable for the ambient
temperature of application should be
selected according to the table on the
right side.
Renewal of Machine Oil
role in the normal operation of the
engine and for this reason,it is necessary
to check the motorcycle for machine oil
period ically and renew the oil once
every800-1,000k m of driving by the
follow ing procedures.
bottom of the hot engine to drain off all
old oil.
remount it really to position.T hen fill in
0.8L fresh machine oil and start the
engine for id le running2-3 minutes.
and check to see whether the oil level is
in between the upper and lower lines of
the oil gauge.
different grade than the specified one to
avoid machinery failure.
12
Machine oil plays a very important
Remove the screw plug from the
Wash the oil filter screen clean and
Let the engine stop for 1-2 minutes
Do not use any machine oil of a