Your Dab+ Radio - Grundig GDR740DABER Instruction Manual

Grundig Replay

Your DAB+ Radio

No. Button & sockets
1
STANDBY Button
MODE Button
2
RECORD Button
3
4 SD CARD slot
5 EPG Button
6 VOLUME Button
7 TUNE Button
SELECT Knob
8
9 PRESET Button
MENU Button
10
11 INFO Button
12 LCD Display
13 SLEEP Button
14 SNOOZE Button
15 ALARM Button
DC Socket
16
AUX IN Socket
17
Headphone Output
18
19 R/L Audio Socket
20 Antenna
Front
Press the Standby Button to turn the radio on or off.
Press the Mode Button to switch between Aux-In, SD Card, DAB+ and FM Radio modes.
Press the Record Button in either DAB+ or FM Mode to select recording, press the Select Knob to
begin. Press the Record Button again to stop recording remembering to press the Select Knob to
confirm.
The SD Card Slot is where you need to insert your SD Card to record a program or play saved files.
The EPG (Electronic Program Guide) is an on-screen radio guide that makes it easy for you to plan
what programs you listen to in the week ahead. You can also record straight from the EPG to your SD
Card. You can access all of this using the EPG button.
Press the Volume Button to select the Volume Function and then use the Select Knob to change the
volume level, up or down.
Press the Tune Button to in either DAB+ or FM Mode to activate the tune function. The turn the Select
Knob to change the station/frequency.
Turn the Select Knob to change the volume level up or down or to change the FM or DAB+ Station.
Press the Preset Button to access your favourite DAB+ or FM stations quickly.
Press the Menu Button to enter the selected mode‟s Main Menu.
Press the Info Button to view the information about the station or track playing. Press again to cycle
through further information.
The LCD High Resolution Display allows you to view the onscreen information, scrolling text and the
EPG.
Press the Sleep Button to set the sleep time for the radio to switch off after a selected period or turn on.
Press the Snooze Button to postpone the alarm for up to 9 minutes, when the alarm is activated.
Press the Alarm Button to select the alarm function. You have the ability to set two alarms, press the
Alarm Button to select Alarm 1 and press again to select Alarm 2.
The DC Input is where you connect your power adaptor to the unit.
The Auxiliary Input allows you to connect any external audio device like and MP3 Player to the unit via
a 3.5 mm Auxiliary Cable.
The Headphone Output allows you to connect your Headphones for private listening.
The Right and Left Audio Sockets allow you to connect this radio to an external sound system.
It is recommended that you extended the Antenna to ensure that you get the best possible reception.
Descriptions
5
Back