Table of Contents
Advertisement
Administration of the Gigaset SE505 dsl/cable
Wireless
The Wireless screen displays the following information:
Service Set Identi-
fier (SSID)
Channel Number
DHCP Server
Internal Router IP
Address
Subnet Mask
96
Your router is identified in the wireless local network by this iden-
tifier. You must use this
to log on to your router.
You can change this ID in the Advanced Setup using the Wireless
Settings - Basic Settings option.
The channel on which your router communicates with the PC's
which are connected to it wirelessly. You can set the channel
number in the Advanced Setup with the Wireless Settings -
Basic Settings option.
The
DHCP Server
of the router automatically assigns dynamic IP
addresses to the PC's in the local network when it is activated.
This shows whether the DHCP Server is enabled or disabled.
You can change this setting in the Advanced Setup with the LAN
- DHCP Server option.
Shows the
Private IP address
This is different from the IP address which your router has on the
Internet
(Public IP
address). The default internal IP address for the
router is 192.168.2.1.
You can change this setting in the Advanced Setup with the LAN
- Private IP address option.
Indicates the router's
the router must use this subnet mask.
SSID
for all additional PC's which you wish
of your router in the local network.
Subnet
mask. All PC's that are connected to
Advertisement
Table of Contents
