Table of Contents
Advertisement
General configuration with Basic Setup
Use Basic Setup for the general configuration of the Gigaset SE505 dsl/cable. This inclu-
des the settings for the WAN interface.
The router's
WAN
interface is used to provide a connection to the
connected to the router. For the setup you will need the access data you have received
from your
Internet Service
Remember that configuration saves the access data in the router. Before
passing your router on to somebody else or having your dealer replace it,
i
you should first restore the factory settings. Otherwise unauthorised per-
sons may use your Internet access data at your expense. You will find
information about resetting the router on page 103.
The router user interface guides you through configuration step by step. Once you have
completed a screen, click on NEXT. If you want to make any changes or check your
entries, click on BACK.
Select Basic Setup in the start screen to launch the configuration.
Select Country
The first step of the Basic Setup is to select the Country in which you wish to operate
your router.
u
Select your Country from the pick list.
u
Click on NEXT.
Selecting the country automatically selects the time zone as well. If nec-
i
essary, you can set the time zone separately using Advanced Setup (see
page 88).
General configuration with Basic Setup
Provider. Please have this data to hand.
Internet
for all the PC's
51
Advertisement
Table of Contents
