Table of Contents
Advertisement
First Steps
Activating
Connect the mains adapter cable to the 12V DC socket on the router. Plug the mains
adapter into a mains socket.
This activates the Gigaset SE505 dsl/cable. The power LED on the front lights up. The
power LED and the WAN LED on the front light up, indicating that the modem is con-
nected.
The LAN LEDs light up if a device is connected to the corresponding LAN connection.
The LED WLAN lights up, indicating that the wireless interface of the Gigaset SE505 dsl/
cable has been activated.
The wireless link to the PC's connected via a wireless network adapter will be established
automatically if their network adapters have been configured with the same
SSID
as the
router (see page 15). It can take a few seconds for the wireless connection to be estab-
lished.
The WLAN and LAN LEDs flash when data is being transferred between the PC and the
corresponding router connection.
If this is not the case, please turn to "Fault tracing" on page 100.
17
Advertisement
Table of Contents
