Hardware Installation; Connecting The Wol Cable - D-Link DFE-550TX Quick Instruction Manual

Hardware Installation

1-1 Shut down the computer & unplug the power cord.
1-2 Remove the chassis cover.
1-3 Plug the Boot ROM into the appropriate socket if your order
includes Boot ROM, if not, go ahead to 1-4.
1-4 Insert the card into an empty PCI slot.
1-5 Install the bracket screw to secure the card to the computer
chassis.
1-6 Connect the WOL cable if your system supports WOL.
(See more details in Step 2)
1-7 Replace the computer chassis cover.
1-8 Reconnect the power cord and switch the computer power on.

Connecting the WOL cable

2.1 Connect the end of the WOL cable connector to the NIC WOL
connector.
2.2 Refer to the motherboard manual to find the WOL socket
location and connect the cable.
2.3 Power on the PC and press Delete or F1 when prompted to
CMOS setup. Enable the WOL function.
2