Advertisement
2. Dial target number
3. Wait for recipient to
answer
4. Press Transfer again
to complete the
transfer or EndCall to
cancel
Call Waiting
1. When you hear a call
waiting beep (single
alert) press Answer soft
key (first call goes on
hold)
2. Use Navigation button
to alternate between
calls and press Resume
soft key to return to a call
3. Press EndCall soft key
to disconnect the
selected caller
Do Not Disturb (DND)
A feature to turn off the
ringer on your phone or to
turn off all audible and visual
notifications of incoming
calls.
Your system administrator
enables DND for your
phone.
To turn on:
1. Press DND or Do Not
Disturb
2. "Do Not Disturb" displays
on the phone
3. The DND lights
the ring tone is turned off
| CISCO IP PHONE 7975 SERIES | Instructional & Information Technology Services |
To turn off:
1. Press DND or
Do Not Disturb
Check Messages
New Message Indicators:
1. Steady red light on the
handset
2. Flashing message icon
and text message
appears on your phone
screen
3. A stutter tone is heard
from your handset,
headset or speaker
phone when you place
a call
Retrieve Message(s)
1. Press the Messages
button
2. Follow prompts to
check voice mail
Place a Conference Call
Up to six participants.
1. From a connected call,
press Confrn or
Conference
2. Press the More soft key
to see Confrn or touch
the screen
3. Call the next person
4. Wait for the call to
connect
5. Press Confrn or
Conference again to
add the participant to
your call
and
6. Repeat as necessary
for each additional
participant
12/15/2010
End a Conference Call
1. Press EndCall soft key
or touch screen
or
2. Return handset
Meet Me Conference Call
Requires special phone
number from IITS.
To establish:
1. Lift receiver
2. Press MeetMe soft key
or touch screen
3. Dial the assigned
MeetMe conference
number
Participants can now join
conference by dialing in.
To join a MeetMe call:
1. Dial the assigned
MeetMe conference
number
Note: If participants call the
MeetMe number before the call
has been established by the
coordinator of the conference
call, they will hear a busy tone.
End the conference:
1. All participants must
hang up
Join
1. From an active call,
press Join
2. Press More to display
this soft key
3. Press the green
(flashing) line button
for the calls you
wish to join
3
P.
Advertisement
