Port Setting - NETGEAR FS728TP Software Administration Manual

FS728TP Smart Switch Software Administration Manual

Port Setting

Figure 4-16
The Voice VLAN Port Setting screen allows network managers to add ports or LAGs to the Voice
VLAN.
To add ports or LAGs to the Voice VLAN:
The Voice VLAN Port Setting screen contains the following fields:
• Interface – Displays the interface for which the Voice VLAN settings are applied.
• Voice VLAN Mode – Select the Voice VLAN mode. The possible field values are:
– None – Maintains the current Voice VLAN port/LAG settings. This is the default
value.
– Auto – Enables the port/LAG to join the Voice VLAN if traffic with an IP Phone
MAC Address is transmitted on the port/LAG. The port/LAG is aged out of the Voice
VLAN if the IP phone's MAC address (with an OUI prefix) is aged out and exceeds
the defined aging time. If the MAC Address of the IP phones OUI was added
manually to a port/LAG in the Voice VLAN, the user cannot add it to the Voice VLAN
in Auto mode, only in Manual mode.
4-24
v1.1, September 2009
Configuring Switching Settings