NETGEAR FS728TP Software Administration Manual page 62

FS728TP Smart Switch Software Administration Manual
Figure 3-14
The SNMPv3 Community Configuration screen contains the following fields:
• Management Station IP – Enter the management station IP address for which the SNMP
community is defined.
• Community String – Enter the password used to authenticate the management station to
the device.
• Group Name – Select the SNMP group from a list of SNMP groups defined in the SNMP
Group Configuration screen.
2. Select the SNMP community entry.
3. Enter the Management Station and Community String in the provided fields.
4. Select the Group Name from the list.
5. Click APPLY to update the device.
To add a new SNMPv3 community:
1. Click System > SNMP > SNMPv3 > Community Configuration. The SNMPv3 Community
Configuration screen displays.
2. Enter the Management Station and Community String in the provided fields in the first row.
Managing System Settings
v1.1, September 2009
3-25