Weekly Command Timer - Panasonic TH-80BF1U Operating Instruction

Item
Sets All Aspect mode (advanced aspect setting) or default aspect mode.
With each press of
Off: Default aspect mode
On: All Aspect mode
Aspect mode of each setting is as follows:
All aspect
(Example: HD signal)
Off TH-80BF1U, TH-65BF1U, TH-50BF1U:
On 4:3 (1)→4:3 (2)→4:3 Full→Zoom1→Zoom2→Zoom3→16:9→14:9→Just1→Just2
Sets the operational mode of the automatic position adjustment in the Pos./Size menu.
Manual: Automatic position adjustment starts when
Auto setup
Auto: Other than remote control or menu operation, automatic position adjustment starts:
Whether to show/hide No activity power off Precautions at the time of power ON is set.
Power on message On: The warning precautions are shown at the time of power ON.
Off: The warning precautions are not shown at the time of power ON.
(No activity power off)
Note: This setting is enabled only if "No activity power off" is "Enable" (see page 83).
Whether to show/hide an information message that tells the power has been turned off by Power
Management when the power is set to ON.
Power on message
On: The information is shown at the time of power ON.
(Power management)
Off: The information is not shown at the time of power ON.
Note: This setting is enabled only if "Power management" function is "On" (see page 78).
Normalisation
When both main unit buttons and remote control are disabled due to the "Button lock" or "Controller user level"
adjustments, set all the values "Off" so that all the buttons are enabled again.
Press the button on main unit together with
-
/
5 seconds. The "Shipping" menu is displayed and the lock is released when it disappears.

Weekly command timer

You can set 7-day timer programming by setting time and command.
Note:
Before setting Weekly command timer, set Day/Time settings. (see page 72)
1
2
3
button, the aspect changes in the selected mode.
4:3→H-FILL→ZOOM→FULL→JUST
TH-80BF1E, TH-65BF1E, TH-50BF1E, TH-80BF1W, TH-65BF1W, TH-50BF1W:
4:3→4:3 Full→Zoom1→Zoom2→Zoom3→16:9→14:9→Just
position adjustment is executed from the Pos./Size menu.
When the display power is turned ON.
When the input signal is switched.
Press to select Function.
Press to select "On".
Note:
•
When Function is set to On, On/Off timer settings (see
page 72) is unavailable and Interval / Time designation in
Mode of Screensaver (see page 76) cannot be selected.
Press to select a day.
Press to select a program number.
Note:
•
You can set the program from 1 to 7.
--- indicates unset.
Press to select Program Edit.
Press to show the Program Edit screen.
Adjustments
is pressed on the remote control or automatic
button on the remote control and hold for more than
Options Adjustments
Options
Weekly command timer
Audio input select
Input Search
Onscreen display
Press ACTION ( ) button
Weekly command timer
Function
Monday
Tuesday
Wednesday
Thursday
Friday
Weekly Command Timer
Saturday
Sunday
Function
Program Edit
Monday
Program number
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Program Edit
Program Edit screen
1/3
On
On
Program1
Program3
---
Program3
---
Program6
Program4
On
Program1
Program3
---
Program3
---
Program6
Program4
91