Color Universal Design Setting; Setup For Input Signals; Component / Rgb-In Select; Yuv / Rgb-In Select - Panasonic TH-80BF1U Operating Instruction

COLOR UNIVERSAL DESIGN setting

Sets COLOR UNIVERSAL DESIGN
About COLOR UNIVERSAL DESIGN (CUD)
Color Universal Design is a design made in consideration of colorations to allow information to be accurately conveyed
to people who see color differently from ordinary people (congenital color weakness, senile cataract, glaucoma, etc.).
Select "COLOR UNIVERSAL DESIGN setting" in "Setup" and press

COLOR UNIVERSAL DESIGN setting

Save
COLOR UNIVERSAL DESIGN
Set to "On" or "Off", and then select "Save".
On: Uses the color palette corresponding to Color Universal Design.
Off: Uses a color palette different from the palette when "COLOR UNIVERSAL DESIGN" is set to "On".
Confirmation screen is displayed. Select "Ok" to apply the setting.
COLOR UNIVERSAL DESIGN setting
メモリー保存
Setting change will take effect after next power-on.
Ok
Notes:
•
After the setting is switched, the setting is applied from the next power-on.
•
When it is set to "On", a message appears at startup.

Setup for Input Signals

Component / RGB-in select

Component RGB
Select to match the signals from the source connected to the Component / RGB or PC input terminals.
Y, P , P signals "Component"
B R
RGB signals "RGB"
Note:
Make setting of the selected input terminal (COMPONENT/RGB IN or PC IN).

YUV / RGB-in select

YUV RGB
Select to match the signals from the source connected to the DVI-D input terminals.
YUV signals "YUV"
RGB signals "RGB"
Note:
•
Selection may not be possible, depending on which optional board is installed.
•
Make setting of the selected input terminal (SLOT or DVI-D IN).
84
Off
Cancel
.