Options Adjustments - Panasonic TH-80BF1U Operating Instruction

Options Adjustments

The remote control is used for all the Options menu operations. Unit buttons or multi-touch operations cannot be
used for this operation.
1
2
3
4
5
•
The serial number of this device is displayed when "Display serial number" is selected in step 3.
Item
Weekly command timer Sets "Weekly command timer". (see page 91)
Audio input select Set up the sound when an image input is selected. (see page 93)
Input search Set auto input switching for when there is no signal. (see page 94)
On: Displays all the following on screen.
Power on display
Input signal switch display
No signal display
Onscreen display
Mute and the remaining time of off-timer after
Off: Hides all the items above from view.
Note:
• To use the unit without displaying the "Control menu", set "Control menu" to "Off" or "Flick". (see page 73)
Adjusts the input signal when the unit is turned on.
Off
DIGITAL LINK
* 1 "SLOT INPUT" is displayed when an optional Terminal Board is installed.
Initial input
* 2 "COMPONENT" may be displayed as "RGB" depending on the setting of "Component/RGB-in
Note:
• This menu is available only when "Input lock" is "Off".
Press
Off
Off: Sets normal volume.
On: Sets your preferred volume.
Initial VOL level
Notes:
• When "Maximum VOL level" is "On", the volume can only be adjusted between 0 and your maximum range.
• You can hear the changed volume regardless of your volume setting before opening the options menu
if you adjust the volume when "Initial VOL level" is "On" and cursor is on the menu.
88
Press to display the Setup menu.
Press to select "OSD language".
Press for more than 3 seconds.
Press to select "Options".
Press to display the Options menu.
Press to select your preferred menu.
Press to adjust the menu.
Press to exit from Options menu.
HDMI1 HDMI2
MIRRORING
When a Terminal Board with dual input terminals is installed, "SLOT INPUT A" and "SLOT INPUT B"
are displayed.
select". (see page 84)
button to adjust the volume when the unit is turned on.
On
Options
Display serial number
Shipping
Adjustments
was pressed.
SLOT INPUT *
VIDEO
1
Panasonic APPLICATION
Options
Weekly command timer
Audio input select
Input search
Onscreen display
Initial input
Initial VOL level
Maximum VOL level
Input lock
Button lock
Controller user level
Options
Off-timer function
Initial startup
Display ID
Serial ID function
Display size
Studio W/B
Studio gain
LAN control protocol
RS-232C/LAN information timing
Options
Slot power
Power on screen delay
DVI-D power management mode
Clock display
All aspect
Auto setup
Mobile connection
Power on message(No activity power off)
Power on message(Power management)
COMPONENT *
PC
2
MEMORY VIEWER
1/3
On
Off
Off 0
Off 0
Off
Off
Off
2/3
Enable
Last memory
0
Off
Off
Off
Off
Protocol 1
3/3
Off
Off
Standard mode
Off
Off
Manual
On
On
On
DVI-D
WHITEBOARD