Remote Control Transmitter - Panasonic TH-80BF1U Operating Instruction

Basic Controls

Remote Control Transmitter

ACTION button
Press to make selections.
ASPECT button
Press to adjust the aspect.
(see page 33)
Standby (ON / OFF) button
The Display must first be plugged
into the wall outlet and turned on at
the power switch (see page 27).
Press this button to turn the Display
On, from Standby mode. Press
it again to turn the Display Off to
Standby mode.
POS./SIZE button
(see page 62)
PICTURE button
(see page 65)
Sound mute On / Off
Press this button to mute the
sound.
Press again to reactivate sound.
Sound is also reactivated when
power is turned off or volume level
is changed.
N button
(see page 64, 65, 66, 70)
POSITION buttons
INPUT button
Press to select Input signal
sequentially. (see page 29)
ECO MODE (ECO)
Press to change the ECO MODE
setup status. (see page 78)
FUNCTION buttons (FUNCTION)
(see page 81)
32
OFF TIMER button
The Display can be preset to switch to
stand-by after a fixed period. The setting
changes to 30 minutes, 60 minutes, 90 minutes
and 0 minutes (off timer cancelled) each time
the button is pressed.
30 min 60 min
0 min (Cancel)
When three minutes remain, "Off timer 3 min"
will flash.
The off timer is cancelled if a power interruption
occurs.
AUTO SETUP button
Automatically adjusts the position/
size of the screen. (see page 62)
SET UP button (see page71)
SOUND button (see page 70)
Volume Adjustment
Press the Volume Up "+" or Down
"–" button to increase or decrease
the sound volume level.
R button (see page 60)
Press the R button to return to
previous menu screen.
RECALL button
Press the "RECALL" button to
display the current system status.
1 Input label
2 Aspect mode (see page 33)
Audio input (see page 93)
Profile name (see page 69)
3 Off timer
The off timer indicator is
displayed only when the off
timer has been set.
4 Clock display (see page 90)
4 10 :0 0
Digital Zoom (see page 34)
90 min
1
PC
4:3
2
♪ COMPONENT
Memory name: MEMORY2
Off timer 90min
3