Panasonic TH-80BF1U Operating Instruction page 76

Touch screen settings
WHITEBOARD settings
Quick launch
When this is set to "On", the built-in WhiteBoard will be in the standby mode when the display is in the standby
mode (power OFF with remote control) and the start up is quicker.
Notes:
•
When set to "On", the power consumption during standby is higher.
•
This sett ing is automatically turned "On" and cannot be changed in the following cases.
When "Slot power" is set to "On" and Terminal Board is installed
When "Network control" is set to "On"
When "Wireless network standby" is set to "On"
Initial background
Sets the initial background to create a new page on the WhiteBoard.
Auto save
Sets the Auto save function of the WhiteBoard to a built-in memory or a USB memory.
On: Saves the drawing contents automatically when the page is changed while drawing on the WhiteBoard without
prompting to save.
Off: Prompts users to save when the page is changed while drawing on the WhiteBoard.
Built-in memory
Sets the built-in memory usage.
Set either "On" or "Off" and select "Save".
Built-in memory setting
Save
Built-in memory
Confirmation screen is displayed. Select "Yes" to apply the settings.
Built-in memory setting
All annotation will be lost.
Do you want to continue?
Yes
74
On: Built-in memory can be used.
Off: Built-in memory is disabled. Files saved in the built-in memory will be
deleted.
Off
No